$250.99 EA
8″ TalonGrip™ Vise Jaw System for a 6″ or 8″ Vise
Due to the overwhelming popularity of the Talongrip™ System we now have Jaws for 4″, 6″ and 8″ vises
Grips on .100″ of materia
$69.99 EA
Advant-Edge Clamps
The MITEE-BITE Advant-Edge Clamp provides additional clamping force and improved table grip.
Tilted clamping element creates a positive downward force and 4,000 lbs. holding f
$229.99 EA
Our standard T-Slot Plates provide a low cost solution to transform your grid plates, cmm’s and even drill presses into a more universal platform. All of our modular clamping systems that use 5/8 an
$49.99 EA
Chip Hooks
The chip hook is an essential safety tool for all shops. These galvanized steel hooks are fitted with a protective polyethylene hilt and wooden handels to ensure a firm grip. Available i
$27.99 EA
Collet Stops
The MITEE-BITE “front” loading Collet Stop is the most convenient 5C Collet Stop on the market. Once seated, the collet need not be removed for adjustment.
Part N0.Length (M
$39.99 EA
Compact Toe Clamps
This cam action fixture clamp provides positive down force while using very little space on a fixture. Work pieces can be clamped in series by using the back surface of a clamp to
$74.99 EA
Dyna-Force® Clamps
The majority of the Dyna-Force® clamp is below the surface of the fixture which provides excellent clamp support and makes for a very low profile. The clamp jaw slides on an an
$50.99 EA
Fixture Clamps
The Cam Action MITEE-BITE Fixture Clamp is made up of two simple components: a hardened steel socket cap screw with an offset head and a brass hexagonal washer.
– Low profile for
$36.99 EA
ID Xpansion™ Clamps
The ID Xpansion™ clamp is the ideal solution to hold parts on an inside diameter for high density machining on vertical or horizontal machining centers. It can also be used
$98.99 EA
Knife Edge Clamps
Our Knife Edge Clamps can be used instead of the original brass hex clamps for clamping rough cut stock, castings and any material that requires a hardened clamping element. Same
$62.99 EA
KOPAL® Mini Clamps
These low profile cam action clamps and stops have a holding force of 880 lbs. (3900N.) and have fingers that push the workpiece down before clamping, even on castings that ha
$612.99 EA
KOPAL® Mono-Bloc Chain Clamp
The Mono-Bloc Chain Clamp is a simple and rapid workholding solution for a wide array of applications. The Chain Clamp offers fast and powerful clamping with forces
$294.99 EA
Kopal Mono-Bloc Clamps
The Mono-bloc clamp is the quickest and easiest way to clamp parts on a Bridgeport-type mill.
One of the fastest and strongest milling clamps available anywhereModular des
$60.99 EA
Loc-Down® System
The Mitee-Bite Loc-Down® System was designed to be a programmer’s and operator’s dream for quickly and easily securing small to large aerospace parts. Its compact design al
$1,200.99 EA
The Loc-Jaw® system was conceived to simplify, and allow greater tooling access and more versatility securing your parts when 4th and 5th axis machining. Designed to hold raw stock without a pre-op
$38.99 EA
Locating Pins and Liners
Use our Diamond and Tapered pins to standardize your shop with a universal pattern, allowing fixtures to be quickly mounted to any machining center.
Designed with simpli
$11.99 EA
Locating Rails for Jigs and Fixtures
Is it taking too long to make a fixture to increase production?
Mitee-Bite Products makes fixture building easier and quicker with the addition of ready made
$97.99 EA
Long length Channel (7075-T6) & Steel Wedge
This material is available in 20″ (508mm) lengths so clamps can be fabricated in different lengths to suit any requirement. Channel and steel wed
$4.99 EA
Long Length Machinable Uniforce® Clamps
Mitee-Bite products introduces the long length Uniforce® Clamp with machinable jaws. The long length clamping jaws give you greater versatility to machin
$43.99 EA
Machinable Fixture Clamps
These clamps, with the machinable steel washers, provide more flexibility for holding round or unusual shaped parts. Parts can be held directly to the fixture plate surf
$83.99 EA
Machinable Pitbull® Clamps
The popular Pitbull® Fixture Clamp is now available in a machinable version. The clamp has positive down force and a very low gripping profile, reducing material cost
$21.99 EA
Machinable Uniforce® Clamps
The compact Mitee-Bite Uniforce® clamp is available with extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece – enab
$34.99 EA
Mitee Grip™
Mitee-Grip is a heat-activated wax-based compound embedded in precision paper, coated on nylon mesh or in a stick form. This holding media maintains parallelism on precision parts.
$45.99 EA
Modular In-Line Clamping System
Mitee-Bite announces the addition of our popular fixture clamps in a modular system. Clamps, grips and stops, designed to be fully adjustable while mounted on T-Slot
$59.99 EA
Modular Pitbull® Clamps
The Pitbull® Fixture Clamp is very well known for its low profile and positive down force. It is now available as a modular clamp in two styles.
The slotted Modular Pit
$44.99 EA
Modular XYZ Xpansion™ Pins
Mitee-Bite Products releases the new Modular XYZ Xpansion™ Pins for Tombstone, Grid Plate and Fixture Plate applications. The unique, patent pending design provides
$49.99 EA
Multi-Fixture Clamps and Stops
The MITEE-BITE Multi-Fixture Clamp offers increased versatility through its unique riser clamp design.
Provides flexible set ups for hard to hold parts
Works in
$2,000.99 EA
Mitee-Bite is proud to introduce possibly the most universal multi-functional vacuum system in today’s market. This system has several unique features to meet your vacuum workholding needs.
Can b
$50.99 EA
OK-VISE® Clamps
THREE-DIMENSIONAL MACHININGDue to a low-profile design of OK-VISE® Clamps, it is possible to execute flexible three-directional machining of workpieces with one fastening. This ab
$550.99 EA
OK-Vise® Multi-Rail System
The Multi-Rail System is a versatile fixturing system perfect for all machining centers. The addition of the new Speed Stop eliminates the need for the standard Stop (Pa