UNITIZED SCOPE RINGS
Cadex Unitized Scope Rings provide a rock solid mount for sniper optics and multiple applications for flat-top ARs and bolt action rifles.
FEATURES
This lightweight, watertight and chemical-resistant rotomolded Field Desk Case has all the features of the traditional Single-Unit model (#472-FLD-DESK-TA-OD) but allows you to attach the table on eit
The Cadex CM2 Sight Mount provides users with a solid optics mount for the M2 12.7mm (.50 cal) Heavy Machine Gun.
Features
a 6” Mil Std M1913 Picatinny rail for secure optics mounting.
Quick de
The Cadex Dual Rail for the C6, M240, and MAG 58 Machine Guns provides users with a robust mount for laser pointers and illumination devices.
Features
Mil Std M1913 rails at the 3 and 9 o’clock
The Cadex Butt Stock Adaptor allows the fitting of issued and aftermarket M4/C8 carbine butt stocks to the C9/M249 light machine gun so that the user can tailor their length of pull and eye relief as
The Cadex Dual Rail for the C9, M249, and FN Minimi Light Machine Guns provide the user with a versatile, lightweight mount for laser pointers and illumination devices.
Features
Mil Std M1913 rail
The Cadex Fore-End Rail for the C9, M249, and FN Minimi LMG’s provides the gunner a solid mount for lights, aiming lasers, and other weapon accessories.
Features
Minimizes heat transfer to the g
The Cadex Recoil Rail (new patent) provides electro-optic devices with protection from firing shock of hard recoiling weapons, such as the M2 .50 caliber machine gun and large caliber sniper weapons.
The BT54 Flushcup Stud – Is a novel means to attach/detach accessories to a Picatinny rail if the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT
The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. Th
The BT52 ACS/STR Picatinny rail adaptor for the popular Magpul ACS and STR style stocks provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your Magpul ACS an
With four inches of flex for weapon agility, this single-point sling adjusts from 46” to 64” in diameter to fit all body sizes and around bulky vests or gear. An elliptical bungee provides comfort
The Lockhart Tactical Picatinny Rail Mounted 1.25" Sling Mount allows both 1.0" and 1.25" slings to be securely attached to any Picatinny rail.To install, simply slide the precision machined mount o
For over 25 years, we have been pushing to bring law enforcement officers the highest quality weapon security equipment there is.Today, we bring you yet another innovation. The Santa Cruz Gunlocks Rap
Components include:
1 x SC-5-XL Universal Gun Lock (key: #2 or handcuff)
1 x SC-403 L-Muzzle Plate
1 x SC-404 Muzzle Plug
1 x SC-9302 Mounting Hinge
2 x SC-401 Upright Brackets
Nuts and Bolts
Overhead universal weapon mount set up with a bracket designed for police cruisers or security vehicles equipped with K9 and flat cages. Secure any weapon in the same setup.Installation kit to exchang
The SC-929-1 can be easily adjusted to accommodate shotguns with varying lengths of pull. Both the butt plate and the gunlock may be adjusted along the length of the rail independently, while our SC-9
SC-931-1 Complete set up for shotgun mount set up for police cruiser or emergency response vehicle. Single weapon set up mounts muzzle down passenger side on any police vehicle partition, trun
Components include:
1 x SC-5-XL Universal Gun Lock (key: #2 or handcuff)
1 x SC-1B Gun Lock (specify key: #2 or handcuff)
1 x SC-502 18” Long Flat Bar
1 x SC-9302 Mounting Hinge
2 x SC-1900 o
FREE SHIPPING INTO THE USA!
Ultimate sniper system currently in use worldwide by special operations units and long range shooters.
Bore height and Fore-end tube
From the top of the 20 MOA top rail
Buttstock Spacer (1 5/16" thick) for all our Strike Chassis except the Urban Strike and the Strike Nuke.
Specification
Dimensions
1.3" x 1.81" x 5.63" | 3.3 x 4.6 x 14.3 cm
Weight
0.17
Components Include:
1 x SC-5-XL Universal Gun Lock (key: #2 or handcuff)
1 x SC-1900 or SC-1901 Butt Plate
1 x SC-503 24″ Flat Bar
1 x SC-9903 L-Bracket
3 x SC-932 Roll Bar Mounting Bases
3
Lockhart Tactical is proud to bring the Powr-Grip 6" Vacuum Cup Tactical Shooting Base to the market. As you probably already know, Powr-Grip is an industry leader in vacuum suction and we wanted to u
Lockhart Tactical is proud to bring the Powr-Grip 10" Vacuum Cup Tactical Shooting Base to the market. As you probably already know, Powr-Grip is an industry leader in vacuum suction and we wanted to
Lockhart Tactical is pleased to introduce the Precison Rifle Pod. Tacical shooting platforms and stability devices are not a new idea, but the revolutionary new PRP is. It has all the features you w
** This is the large clamp only **
This 100% Mil-Spec, 100% Made in America, Universal Rifle Clamp is designed to fit on our Lockhart Tactical LT-KZ TSP Tactical Shooting Platform.This Universal Clam
Lockhart Tactical is pleased to introduce the Precison Rifle Pod. Tacical shooting platforms and stability devices are not a new idea, but the revolutionary new PRP is. It has all the features you wou
The Tactical Shooting Platform was designed with the sharp shooter in mind. The revolutionary ball design gives the operator the ability to deploy a long gun quickly and safely using the maximum advan
FREE SHIPPING INTO THE USA!
Ultimate sniper system currently in use worldwide by special operations units and long range shooters.
Bore height and Fore-end tube
From the top of the 20 MOA top rail
