See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
BT10-NC-No Clamp model (No Clamp meaning it does not have the means to attach to a rail) it requires any 17
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
Height Range approximately
Easily installed with the press of a stainless steel plunger they provide an additional 3 inches of elevation. Work with any of our three available feet. Available in black only. Weight 1.8 ounce.
Easily installed with the press of a stainless steel plunger, the skis deliver a fully articulated smooth foot to support the bipod. Available in black only. Weight 1.6 ounce.
The Standard Quick Knob (QK01) allows quick gross adjustments with the push of a button! The Knob has a spring loaded button that when depressed allows the operator to slide the knob up or down on the
The Mid-Range Quick Knob (QK02) allows quick gross adjustments into the target with a push of a button! The Knob has a spring loaded button that when depressed allows the operator to slide the knob up
The AAIS BOTTOM rail, Part number BT20B is the same rail found in the BT20 but consists of the bottom 1913 rail ONLY that can be attached to the AAIS BT19 on the bottom at the 6 o'clock position. This
Combining pivot and traverse functions with a time-tested bipod design, the Traverse Pivot Bipod is an industry first. The new horizontal traverse feature allows you to steadily track a moving target
Combining pivot and traverse functions with a time-tested bipod design, the Traverse Pivot Bipod is an industry first. The new horizontal traverse feature allows you to steadily track a moving
Tac-Cap. Optional steel cap replaces standard plastic cap found at bottom of knob. This cap can damage soft surfaces and is intended for units that will experience hard use. Friction-fit, no tools req
The TUBE RAIL KIT, part number BT33 consists of a Steel Bar Nut that is designed to fit inside free float tubes and a low profile 1913 Picatinny rail 2.050" long with a 1.00 radius back and 1.602 betw
The new BT34 – 2.05" 1913 Rail has a center to center spacing of 1.6". Two Button head machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle
The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
BT10-Mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.
Height R
The new BT49 – 2.05" 1913 Rail has a center to center spacings 1.2 - 1.6". Two Button head machine screws can be used (not included, see BT1517) to attach this rail to the forearm of stand
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
BT46-NC-No Clamp model (No Clamp meaning it does not have the means to attach to a rail) it requires any 17
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
Height Range approximately
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
BT47-NC-No Clamp model (No Clamp meaning it does not have the means to attach to a rail) it requires any 17
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
Estimated range of elevation is 7 – 13” BT47 Tall
Mounts directly to any 1913 style Picatinny rail via
For long range accuracy, a stabilizing rest of some sort is a fundamental item. This has led the community from resting on rocks to resting on back- packs (of which we approve)... and we now move from
Optional Picatinny rail for Cadex DUAL STRIKE, LITE STRIKE, LITE COMPETITION and FIELD COMPETITION chassis ONLY.
Specification
Dimensions
2.15" x 0.83" x 0.38" | 5.47 x 2.12 x 0.96 cm
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
BT35-NC-No Clamp model (No Clamp meaning it does not have the means to attach to a rail) requires a lever s
The Cadex Falcon Bipod has been designed to provide the ultimate stability. It features multiple take down feet attachments such as claws or standard feet that adapt to any terrains. Can be installed
The Cadex Falcon Bipod has been designed to provide the ultimate stability. It features multiple take down feet attachments such as claws or standard feet that adapt to any terrains. Can be installed
The Cadex Falcon Bipod has been designed to provide the ultimate stability. It features multiple take down feet attachments such as claws or standard feet that adapt to any terrains. Can be installed
The Falcon Bipod Claws are made from 304 stainless steel. The basket style claws help displace weight and provides stability in loose ground. The hinged claws allow for maximum 360° contact on uneven
Steel Bipod Stud
Easily attach a bipod to your chassis without the need of additional picatinny rails.
Lesser weight addition compared to rails.
Different screw size options allow fit for all Cad
The BT58 Spikes are easily installed with the press of a stainless steel plunger on the 5-H model Atlas Bipod. The Spikes deliver a singularly aggressive foot to support the bipod. The spike porti
The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy Internationa
The BT08-QK ASAI Monopod is designed to be used with the original “legacy” AI style stocksides that have a hole in the buttstock hook.
Standard height AI Mount with QK01 Quick Knob. Elevation R
Extended height Stud Mount with QK03 Quick Knob. Additional Thumbnut installed to LOCK unit into a fixed elevation. Elevation Range 5.70 – 6.85”. Weight 9.0 ounce.
--- NOTICE PART BT03 REQUIRED F
Mid height Stud Mount with QK02 Quick Knob. Additional Thumbnut installed to LOCK unit into a fixed elevation. Elevation Range 4.80 – 5.85". Weight 8.2 ounces.
--- NOTICE PART BT03 REQUIRED FOR USE
Standard height Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to LOCK unit into a fixed elevation. Elevation Range 3.75 – 4.85”. Weight 7.3 ounces.
--- NOTICE PART BT03 REQUIRED
Standard height Stud Mount with QK01 Quick Knob. Elevation Range 3.50 – 4.65". Weight 6.5 ounces.
--- NOTICE PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLES---
The BT63 Nose Rail fufills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the "Nose Rail" is designed to be bedded into a channel in the stock w
The BT66 Atlas 5-H BAS Ski Feet are another example of us learning how our products are used and what end users want in order to get more out of our products. Starting with 3.5" 6061-T6 bar stock, the
