Shopping Cart: 0 Items

Roadshark Surface Mount Traffic Spikes – Tire Shredder

Brand: Roadshark - Vehicle Tire Spikes and Traffic BarricadesRoadshark - Vehicle Tire Spikes and Traffic Barricades
CAD1,380.28 EA
Length
Cost: CAD1,380.28 EA -
Add to cart
A surface mounted compression barrier with a base height of less than 3.0″inches, equal to a common speed bump. Heavy-duty spring-loaded blades extend up to 4.5″inches ( 11.5 cm) above the road surface, however blade size and angle is adjustable. Spring tension is also adjustable.
 
These barriers come in 3’ (1m), 4’ (1.3m) or 6’ (2m) sections as Model #SM38, SM48 and #SM72.
 
A surface mounted barrier with electric motorized controller is available –Model #SME48. Contact us for more information!

*** Please note that these items heavy and subject to additional freight rates which will be calculated prior to shipment with client's consent. ***

Some features include:

  • Adjustable Blade Height and Angle – Roadshark traffic spike barrier users can adjust the blades to be less aggressive. This can allow for a “phase in” period for motorists at new installations. – Customers can adjust the thickness of the internal rubber bumpers and lower the blade height if required.
  • Proprietary Lockdown Mechanism – easy to use and blades can be locked down in less than a minute. If our competitors have this type of feature, it may work in their showroom but good luck in the corrosive, dirty environment of the real world.!
  • Reinforced Axle – prevents blades from bending or twisting. Axles and blades are coated with high visibility yellow nylon coating ( which outlives galvanizing and powdercoating by 10 times)
  • No Rust – Polyurethane coatings and stainless steel fasteners. The top plate of Roadshark barriers is held down with stainless steel bolts that will not rust and stain the surface of the barriers. Our polyurethane finish will not wear off like powdercoating and reduces operating noise.
  • Adjustable Spring Tension. – Roadshark installers can adjust the size and number of torsion springs to achieve the required tension (upward force on the blades ).
  • Low Maintenance. – Our barriers can go months without cleaning. We use one axle per unit which reduces the number of springs required and the amount of maintenance required. Some of our competitors use multiple springs for every 1 or 2 blades which requires continuous maintenance as springs fail
  • Stainless Steel Springs. – The strength and design or our springs results in less maintenance with springs lasting over 100,000+ cycles. Springs can last several months and replacement is normally done in under 10 minutes. springs are $15.00 USD each to replace.
  • Reduce Operating Noise & Increase Life – Internal rubber bumpers reduce operating noise and increase the life of barrier components.

You will find that our barriers are built to last and will give you years of trouble-free operation. Some of the Roadshark barriers currently installed in the U.S. experience over 200 vehicles per day and have been reliable where competitors’ products have failed.

***Price includes spare springs, 2 yr warranty, installation hardware and 20inch DO NOT ENTER stencil for marking the roadway if desired.. Average life of equipment is 7.5 years

Contact Us

Lockhart Logo


  • Vancouver Island, BC, Canada
  • 250-715-7290
  • Need support? Click the envelope below!

Join our Community

Lockhart Tactical
X