WARRANTY INSTRUCTIONS:
STEP 1: ADD TO CART
STEP 2: YOU MUST INCLUDE THE FOLLOWING INFORMATION IN THE ORDER NOTES SECTION OF THE CHECKOUT:
- YOUR LOCKHART TACTICAL ORDER NUMBER ASSOCIATED TO YOUR GEN 1 CARRIER
OR THE STORE YOU PURCHASED FROM.
- YOUR RIFLES SERIAL NUMBER
STEP 3: SUBMIT THE ORDER AND AWAIT YOUR NEW GEN 2 CARRIER.
ONCE YOU RECEIVER YOUR GEN 2 CARRIER, SWAP OVER COMPONENTS FROM THE GEN 1 CARRIER.
STEP 4: RETURN YOUR GEN 1 CARRIER TO LOCKHART TACTICAL WITHIN 3 WEEKS OF RECEIVING YOUR GEN 2 CARRIER.
NOTE: YOU MUST RETURN YOUR GEN 1 CARRIER TO LOCKHART TACTICAL
FAILURE TO INCLUDE YOUR ORDER NUMBER / SERIAL NUMBER IN THE ORDER MAY RESULT IN THE CANCELLATION OF YOUR ORDER.
SWAPPING PARTS FROM YOUR GEN 1 CARRIER TO YOUR NEW GEN 2:
You will need to swap over your firing pin, firing pin retainig pin, firing pin, cam pin, bolt and gas key.
This should take less than 2 minutes and is very easy and 95% of this is the exact same you would do anytime you clean the bolt carrier.
NOTE: IF YOU WOULD RATHER LOCKHART TACTICAL DO THE BOLT COMPONENT SWAP, YOU MUST RETURN YOUR COMPLETE GEN 1 BOLT AND CARRIER TO LOCKHART TACTICAL. WE WILL COMPLETE THE WORK AND RESHIP A COMPLETE GEN 2 CARRIER TO YOU.
Fits Raven: [5.56] [7.62x39]
Includes:
1x Raven Mid Length Bolt Carrier Only
Enhancements:
- Carrier tail has thicker walls
- Top strengthening rib
- Carrier tail bore fits extension pin required for standard AR side folding stocks
- Enhanced geometry transfers recoil forces down carrier without allowing distorsion
- Reduced skeletonization.
Weight:
8.7 oz
