The BT58 Spikes are easily installed with the press of a stainless steel plunger on the 5-H model Atlas Bipod. The Spikes deliver a singularly aggressive foot to support the bipod. The spike porti

When installed on your CAR collapsible stock allows any of our PRM style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks

The BT54 Flushcup Stud – Is a novel means to attach/detach accessories to a Picatinny rail if the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT

Gen. 2 Folding Foregrip: 0°, 45° and 90° positions Folding Vertical Fore Grip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap wi

Due to customers requests we will offer as a set a BT20B and the American Defense AD-170-S lever as an assembly. The BT43 will provide the means to add the quick release feature provided by the ADM le

See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle! BT46-NC-No Clamp model (No Clamp meaning it does not have the means to attach to a rail) it requires any 17

See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle! Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever. Height Range approximately

See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle! BT47-NC-No Clamp model (No Clamp meaning it does not have the means to attach to a rail) it requires any 17

See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle! Estimated range of elevation is 7 – 13” BT47 Tall Mounts directly to any 1913 style Picatinny rail via

The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out

The Mid-Range Quick Knob (QK02) allows quick gross adjustments into the target with a push of a button! The Knob has a spring loaded button that when depressed allows the operator to slide the knob up

The Standard Quick Knob (QK01) allows quick gross adjustments with the push of a button! The Knob has a spring loaded button that when depressed allows the operator to slide the knob up or down on the

Used for mounting 1913 rails (our part numbers BT15 and BT17) consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws. These T-nuts are commonly used by stock builders to acco

The BT53 SILO is a novel and patent pending product that attaches by means of a Picatinny rail and provides; a textured front that can be pressed into barricades, Rubber side bars for “soft” side

Tac-Cap. Optional steel cap replaces standard plastic cap found at bottom of knob. This cap can damage soft surfaces and is intended for units that will experience hard use. Friction-fit, no tools req

The Sako TRG Rail Kit comes complete and ready to install on your TRG stock. The kit allows for the installation of either the Accu-Shot BT12 or BT12-QK Precision Rail Monopods (BT12-QK is shown but n

The TUBE RAIL KIT, part number BT33 consists of a Steel Bar Nut that is designed to fit inside free float tubes and a low profile 1913 Picatinny rail 2.050" long with a 1.00 radius back and 1.602 betw

ASP TrainingProtecting Those Who Protect. It is a corporate goal. A statement of mission. An approach to doing business. ASP Training is a service that we provide, not a profit center from which we be

The BT63 Nose Rail fufills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the "Nose Rail" is designed to be bedded into a channel in the stock w

The BT65-LW17 CAL (Cant And Loc) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It was developed for shooters that do not desire the Panning feature of

The BT66 Atlas 5-H BAS Ski Feet are another example of us learning how our products are used and what end users want in order to get more out of our products. Starting with 3.5" 6061-T6 bar stock, the