The Kestrel 3000 Pocket Weather Meter is the handheld weather-monitoring device that provides a wide range of functions, plus accurate relative humidity measurements. Before the Kestrel 3000 came alon
The Kestrel 2500 Pocket Weather Meter measures wind and temperature with total accuracy, and has the added benefits of an air pressure sensor that provides altitude and barometric information. Kestrel
The Kestrel 2000 Pocket Weather Meter is the most elementary temperature and wind monitor in the Kestrel Meter collection. Capable of measuring both wind and temperature phenomena, the Kestrel 2000 Th
The Kestrel 1000 Wind Meter is the base model in our extensive assortment of Kestrel pocket weather meters. Simple and compact, the Kestrel 1000 fits right into the palm of your hand and weighs a mere
The 2 PowerFlare soft pack is the ideal solution for carrying your non-rechargeable PowerFlares in a neat custom storage bag. The kit comes with one set of directions, one wrench for changing batterie
The MultiPack24 is designed to meet the demanding needs of the military and law enforcement community. With communication being key in stressful situations, look to the MultiPack24 to have a little bi
Magnetic Base 33 lbsGet rid of incendiary flares and replace it with the durable, long lasting PowerFlare Safety Light. You can run it over with anything on the road without harming the unit. Great fo
The PowerFlare 6-Pack Rechargeable System comes with six of the PF-200R beacons in a rugged recharging case. The recharger is plugged into a vehicle hot point (12-30VDC), using a power cord that is
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
BT10-Mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.
Height R
Tac-Cap. Optional steel cap replaces standard plastic cap found at bottom of knob. This cap can damage soft surfaces and is intended for units that will experience hard use. Friction-fit, no tools req
When installed on your CAR collapsible stock allows any of our PRM style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks
The Sako TRG Rail Kit comes complete and ready to install on your TRG stock. The kit allows for the installation of either the Accu-Shot BT12 or BT12-QK Precision Rail Monopods (BT12-QK is shown but n
This adapter is required to attach the BT08-QK ASAI monopod (used with the original “legacy” AI style stocksides) to the new Accuracy International “Gen 2” style stocksides. Mod
The Standard Quick Knob (QK01) allows quick gross adjustments with the push of a button! The Knob has a spring loaded button that when depressed allows the operator to slide the knob up or down on the
The Mid-Range Quick Knob (QK02) allows quick gross adjustments into the target with a push of a button! The Knob has a spring loaded button that when depressed allows the operator to slide the knob up
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
BT10-NC-No Clamp model (No Clamp meaning it does not have the means to attach to a rail) it requires any 17
See our incredibly helpful bipod comparison chart to find the perfect fit for your rifle!
Mounts directly to any 1913 style Picatinny rail via included ADM 170-S Lever.
Height Range approximately
The AAIS BOTTOM rail, Part number BT20B is the same rail found in the BT20 but consists of the bottom 1913 rail ONLY that can be attached to the AAIS BT19 on the bottom at the 6 o'clock position. This
Easily installed with the press of a stainless steel plunger they provide an additional 3 inches of elevation. Work with any of our three available feet. Available in black only. Weight 1.8 ounce.
Easily installed with the press of a stainless steel plunger, the skis deliver a fully articulated smooth foot to support the bipod. Available in black only. Weight 1.6 ounce.
The Atlas Bipod Pouch accessory pouch accommodates all models of the Atlas bipod and offers separate pockets for leg extensions and either or both sets of the optional Atlas feet: available in Ranger
The new BT15 3.35" 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" with a relieved base to accommodate curved surfaces. A standard sling stud and Sling Stud
Used for mounting 1913 rails (our part numbers BT15 and BT17) consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws.
These T-nuts are commonly used by stock builders to acco
AFAR Rail Kit - We are proud to introduce the new Patent Pending AFAR Kit, that will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the BT10 or BT10-LW17 Atlas
The TUBE RAIL KIT, part number BT33 consists of a Steel Bar Nut that is designed to fit inside free float tubes and a low profile 1913 Picatinny rail 2.050" long with a 1.00 radius back and 1.602 betw
The new BT34 – 2.05" 1913 Rail has a center to center spacing of 1.6". Two Button head machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle
Due to customers requests we will offer as a set a BT20B and the American Defense AD-170-S lever as an assembly. The BT43 will provide the means to add the quick release feature provided by the ADM le
B&T Industries L.L.C. is proud to introduce a letter opener for our customers that want to have a serious desk top accouterment with purpose and function. We machined the Handle and Pommel from 30
The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out
The D1 Patrol Duty Bag is constructed of 840 denier, water-resistant nylon with PVC backing and features heavy-duty zippers and a removable nylon web shoulder strap. It has a spacious interior compart
The Centurion™ Elbow Pads feature half-inch, high-density foam, covered in Cordura® nylon for rugged durability. The pads wrap around and secure to the leg with two elastic straps and a hook and lo
The G3 Giant SWAT Bag has an open-cavity design for a wide variety of gear. It is constructed of a 600 denier, water-resistant polyester shell with PVC backing and heavy-duty reinforced handles and st
The Centurion™ Knee Pads feature half-inch, high-density foam, covered in Cordura® nylon for rugged durability. The pads wrap around and secure to the leg with two elastic straps and a hook and loo
Designed to compliment the Centurion™ Upper Body Chest and Shoulder Protection System, it was specifically designed for blunt trauma protection during riot control situations. It protects the thigh
The XTAK Knee Pads are extremely light and flexible and provide superior protection, while remaining flexible enough to move the way the body moves. Thermal plastic urethane (TPU) shell with a Cordura
The XTAK™ Elbow Pads are extremely lightweight and provide superior protection and shock absorption, while remaining flexible enough to move the way the body moves. The thermal plastic urethane (TPU
