$32.51 EA
Lockhart Tactical Raven Extended Safety Selector Switches.Fits: LTAC Raven Selector TubeSlip-free buttons are a game-changer for those who rely on precision and accuracy in their work.These enhanced s
$16.25 EA
Lockhart Tactical Raven 9 Spare Bolt Extractor Retaining Pin.Fits: [9mm] [10mm] [.40S&W] [.45AUTO]Machined from billet 316 stainless steel and DLC coated for maximum corrosion resistance.Our extra
$2.43 EA
Lockhart Tactical Raven 9 Extractor Spring.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.223) (5.56) (7.62x39) Includes:Raven Extractor SpringSpecs:Mil-specReady to drop in and goInstallation notes: Aft
$2.43 EA
Lockhart Tactical Raven 9 Extractor Spring Insert.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.223) (5.56) (7.62x39) (.22LR) (.410GA)Includes:Raven Extractor Spring InsertSpecs:Mil-specReady to drop in
$47.97 EA
Raven Spare Firing Pin and SpringMade from S7 Tool Steel, heat treated and DLC coated for optimal performance.Includes:1x Hardened Firing Pin with DLC Ultra-low Friction Coating1x Stainless Steel Firi
$4.06 EA
Lockhart Tactical Raven 9 Firing Pin Retaining Pin.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.223) (5.56) (7.62x39) (.22LR) (.410GA)Includes:Raven Firing Pin Retaining Pin
Specs:Mil-specSteel Constr
$264.24 EA
Lockhart Tactical Raven 9 Spare Handguard 18".
Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.223) (5.56) (7.62x39)
A Handguard like no-other Our barrel is concealed by our proprietary aluminum hand gu
$8.12 EA
Lockhart Tactical Raven Hardware Pack .22LRFits: [22LR]This hardware pack fits the Raven .22LR Conversion bolt.Note: This contains all screws and roll pins required to rebuild the .22LR bolt carrier g
$129.00 EA
Lockhart Tactical Raven Left Side Bolt Catch Rear - Glock (9mm)Fits: Glock Magwell - (9mm)Made from Stainless Steel, Our bolt catch system is modular, allowing you to swap certain components during so
$31.71 EA
Lockhart Tactical Raven Left Side Magazine Catch - Glock (9mm)Fits: Glock Magwell - (9mm)Made from billet 7075-T6 for an incredible strength to weight ratio. Coated for added surface hardness, wear re
$16.25 EA
Lockhart Tactical Raven Left Magazine Release Retaining Pin - Glock (9mm)Fits: Glock Magwell - (9mm)Machined from billet 316 stainless steel and DLC coated for maximum corrosion resistance.Our retaini
$264.24 EA
What does "STRIPPED" Mean?Stripped means ONLY the magwell body itself is included.9x19MM Glock Gold and Platinum Models:Stripped MagwellRight Hand Bolt Catch / Release (PLATINUM ONLY)Left Hand Bolt Ca
$48.78 EA
Lockhart Tactical Raven 9 Magwell Cover Glock
Fits: (9mm) (.40S&W)The magwell cover secures the left hand bolt catch system and acts as a magazine stop as well.If you have a Raven 9 in the GOLD e
$124.00 EA
ESTIMATED SHIP DATE: JUNE / JULY 2023
Raven Upper Receiver Modular Brass Deflector
This optional and modular brass deflector can be installed in all Raven mid length upper receivers.
Installs and R
$124.00 EA
Raven Upper Receiver Modular Dust Cover Door
This optional modular dust cover door can be installed in all Raven mid length upper receivers.
Installs and Removes in seconds with a single hex tool an
$72.36 EA
PRE-ORDERS Will be shipping before CHRISTMAS 2023Raven Upper Receiver Modular Dust Cover Door - Enhanced Upswing
This optional upswing door can ONLY be installed on the Gen 3 Enhanced Upper Receiver.
$243.10 EA
Complete Spare Modular Bolt AssemblyMade from S7 Tool Steel, Our Bolt Carrier Rear and Front is coated with a DLC (Diamond-like Carbon) for maximum hardnes, wear resistance and slickness, ensuring you
$1,274.00 EA
Transform your Raven from 9x19mm to 5.56 NATO without any tools in under 30 seconds.5.56 Barrel twist rate: 1:8Parts Included:Mid Length Magwell - Fits 5.56 (PLATINUM & GOLD)Ambidextrous Magazine
$599.00 EA
Transform your Raven from 5.56 NATO to 9x19mm without any tools in under 30 seconds.9x19mm Barrel twist rate: 1:10Parts Included:Standard Length Magwell (Fits 9x19mm and .40 S&W) (PLATINUM & G
$924.00 EA
Transform your Raven from 5.56 NATO to .300 AAC Blackout without any tools in under 30 seconds.300 AAC Blackout Barrel twist rate: 1:10** Barrel Nut and Handguard not included unless selected as an op
$39.84 EA
Lockhart Tactical Raven Right Side Bolt Catch Rear - Glock (9mm)Fits: Glock Magwell - (9mm)Made from Stainless Steel, Our bolt catch system is modular, allowing you to swap certain components during s
$39.84 EA
Lockhart Tactical Raven Right Side Magazine Catch - Glock (9mm)
Fits: Glock Magwell - (9mm)
Made from billet 7075-T6 for an incredible strength to weight ratio. Coated for added surface hardness, we
$3.24 EA
Lockhart Tactical Raven 9 Safety Selector.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.223) (5.56) (7.62x39) (.22LR) (.410GA)All Mil-Spec lowersAll Mil-Spec buffer retainersIncludes:Raven Safety Select
$2.43 EA
Lockhart Tactical Raven 9 Safety Selector Spring.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.223) (5.56) (7.62x39) (.22LR) (.410GA)All Mil-Spec lowersAll Mil-Spec buffer retainersIncludes:Raven Safety
$65.04 EA
Lockhart Tactical Raven 9 Safety Selector.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.223) (5.56) (7.62x39) (.22LR) (.410GA)All Mil-Spec lowersAll Mil-Spec buffer retainersIncludes:Raven Safety Select
$95.00 EA
Raven Upper Receiver Left Side Charging Handle Cover This optional cover block can be installed in all Raven mid length upper receivers if the left side charging handle is not being utilized.Installin
$95.00 EA
Raven Upper Receiver Side Charging Handle CoverThis optional cover block can be installed in all Raven standard length upper receivers on the left or right hand side charging handle is not being utili
$16.25 EA
The Lockhart Tactical Raven 9 Spare Standard Button Retaining Pin fits both the Bolt Catch and Right Hand Magazine Release buttons.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (5.56)Machined from billet
$389.00 EA
The Lowest cost way to own a Raven! You can buy the final required parts to finish building your rifle at a later date.Limit 10 per PALMade from billet 7075-T6 Aluminum, this additional lower receiver
$4.06 EA
Lockhart Tactical Raven 9 Talon Charging Handle Spring.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.223) (5.56) (7.62x39) (.22LR) (.410GA)Includes:Raven Talon Charging Handle SpringSpecs:Stainless Stee
$24.38 EA
Lockhart Tactical Raven 9 Spare Upper Bolt Key.Fits: (9mm) (10mm) (.40S&W) (.45AUTO) (.22LR)Made from 316 Stainless Steel, Our Upper Bolt Key is coated with a DLC (Diamond-like Carbon) for maximum
$32.51 EA
Raven Upper Receiver Charging BlockThis block must be installed in all upper receivers which do not use a top style charging handle.Installing this block prevents gas from blowing rearward into the us
$264.24 EA
Lockhart Tactical Raven 9 Spare Upper Receiver Standard Length
Fits: (9mm) (10mm) (.40S&W) (.45AUTO)Made from 7075-T6 billet aluminum and protected with a cerakote finish
Includes:Raven 9 Spare
$24.38 EA
Spare side charging handle for the Raven.Machined from billet 316 stainless steel and DLC coated for maximum corrosion resistance.The exterior handle features knurling to aid in tool-less removal and
$1.59 EA
Pistol Grip Lock Washer
Fits standard pistol grip screw
$3.21 EA
Standard Pistol Grip Screw
1/4-28x 3/4 Socket Cap Screw Stainless
$29.99 EA
Made from 7075 billet aluminum with a Black Anodized coating. Screws onto standard 1/2" x 28 threaded barrels.Perfect for our Raven 9mm or 556!While shooting, gas is directed both sideways and upwards
$124.99 EA
Made from 7075 billet aluminum with a Black Anodized coating. Screws onto standard 1/2" x 28 threaded barrels.Perfect for our Raven 5.56 NATO Caliber Kit!Allows the use of following calibers 5.56 / .2
$175.00 EA
Made from 7075 billet aluminum with a Black Anodized coating.Screws onto standard 5/8" x 24 threaded barrels.Compatible Calibers:.308 Winchester7.62 NATO7.62x39 SKS6.5 Grendel.30-06 Springfield.338 La
$124.99 EA
Made from 7075 billet aluminum with a Black Anodized coating. Screws onto standard 1/2" x 28 threaded barrels.Perfect for our Raven 9mm Carbine!While shooting, gas is directed both sideways and upward