Pitbull® Clamps
The revolutionary Pitbull® Clamp remains the lowest profile, highest holding force clamp in the industry today. High vertical and horizontal clamping forces are generated, consi
Loc-Down® System
The Mitee-Bite Loc-Down® System was designed to be a programmer’s and operator’s dream for quickly and easily securing small to large aerospace parts. Its compact design al
Locating Pins and Liners
Use our Diamond and Tapered pins to standardize your shop with a universal pattern, allowing fixtures to be quickly mounted to any machining center.
Designed with simpli
Modular In-Line Clamping System
Mitee-Bite announces the addition of our popular fixture clamps in a modular system. Clamps, grips and stops, designed to be fully adjustable while mounted on T-Slot
Quick Change Receiver and Blank Pallet
MITEE-BITE announces the addition of a cost effective simple Quick Change Receiver System allowing for the rapid change out and precise location of small fixt
TITANS of CNC Academy Kit
Mitee-Bite Products has just completed a new Kit for the TITANS of CNC Academy, helping to educate in the Art of Fixturing Series. In the kit students will rec
Compact Toe Clamps
This cam action fixture clamp provides positive down force while using very little space on a fixture. Work pieces can be clamped in series by using the back surface of a clamp to
Dyna-Force® Clamps
The majority of the Dyna-Force® clamp is below the surface of the fixture which provides excellent clamp support and makes for a very low profile. The clamp jaw slides on an an
Fixture Clamps
The Cam Action MITEE-BITE Fixture Clamp is made up of two simple components: a hardened steel socket cap screw with an offset head and a brass hexagonal washer.
– Low profile for
ID Xpansion™ Clamps
The ID Xpansion™ clamp is the ideal solution to hold parts on an inside diameter for high density machining on vertical or horizontal machining centers. It can also be used
Knife Edge Clamps
Our Knife Edge Clamps can be used instead of the original brass hex clamps for clamping rough cut stock, castings and any material that requires a hardened clamping element. Same
KOPAL® Mini Clamps
These low profile cam action clamps and stops have a holding force of 880 lbs. (3900N.) and have fingers that push the workpiece down before clamping, even on castings that ha
Locating Rails for Jigs and Fixtures
Is it taking too long to make a fixture to increase production?
Mitee-Bite Products makes fixture building easier and quicker with the addition of ready made
Long length Channel (7075-T6) & Steel Wedge
This material is available in 20″ (508mm) lengths so clamps can be fabricated in different lengths to suit any requirement. Channel and steel wed
Long Length Machinable Uniforce® Clamps
Mitee-Bite products introduces the long length Uniforce® Clamp with machinable jaws. The long length clamping jaws give you greater versatility to machin
Machinable Fixture Clamps
These clamps, with the machinable steel washers, provide more flexibility for holding round or unusual shaped parts. Parts can be held directly to the fixture plate surf
Machinable Pitbull® Clamps
The popular Pitbull® Fixture Clamp is now available in a machinable version. The clamp has positive down force and a very low gripping profile, reducing material cost
Machinable Uniforce® Clamps
The compact Mitee-Bite Uniforce® clamp is available with extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece – enab
Modular Pitbull® Clamps
The Pitbull® Fixture Clamp is very well known for its low profile and positive down force. It is now available as a modular clamp in two styles.
The slotted Modular Pit
Multi-Fixture Clamps and Stops
The MITEE-BITE Multi-Fixture Clamp offers increased versatility through its unique riser clamp design.
Provides flexible set ups for hard to hold parts
Works in
OK-VISE® Clamps
THREE-DIMENSIONAL MACHININGDue to a low-profile design of OK-VISE® Clamps, it is possible to execute flexible three-directional machining of workpieces with one fastening. This ab
Side-Loc Xpansion Clamps
The Side-Loc Xpansion Clamp is actuated from the side, making it perfect for blind hole applications.It’s produced for both mill and lathe applications. The cam shaft a
Uniforce® Clamps
The compact, economical MITEE-BITE Uniforce® Clamp enables you to fixture more parts on the machine table. The specially designed steel wedge spreads the clamping force uniform
Advant-Edge Clamps
The MITEE-BITE Advant-Edge Clamp provides additional clamping force and improved table grip.
Tilted clamping element creates a positive downward force and 4,000 lbs. holding f
Series-9 Clamps
This adjustable low profile, cam action clamp provides clamping of different size workpieces merely by rotating the clamp to one of its other edges. The clamps are .394 (10mm) hig
KOPAL® Mono-Bloc Chain Clamp
The Mono-Bloc Chain Clamp is a simple and rapid workholding solution for a wide array of applications. The Chain Clamp offers fast and powerful clamping with forces
Kopal Mono-Bloc Clamps
The Mono-bloc clamp is the quickest and easiest way to clamp parts on a Bridgeport-type mill.
One of the fastest and strongest milling clamps available anywhereModular des
Strap Clamps
This low profile design promotes superior clamping in both normal and restricted areas with minimal tooling interference.
Heat treated 17-4 P.H. stainless steel
Guaranteed for li
T-Slot Clamps
The original MITEE-BITE T-Slot Clamp combines our unique cam action clamping element with a T-nut.
Locks in machine T-slot for low profile clamping.
Makes fast set-ups possible
